GM has issued a service bulletin regarding a front brake line fitting that may have been torqued under specification in the ...

Figure 14-1 shows a basic brake system with a brake booster, disc brakes on the front wheels, and drum brakes on the rear wheels. Your vehicle may havedisc brakes all around, but the principle is ...

Some units of the Chevy Blazer, Chevy Blazer EV, and Chevy Equinox EV crossovers may have their front right brake line fitting torqued under specification.

Make sure that your rear brakes are working; if not, they could be causing your front brakes to work too hard and overheat.• Does your steering wheel shake when you brake?

Note: This process works fine for front brakes. But, if you’re changing the rear brakes, you may need another special tool to compress the caliper because of the emergency brake.

Replacing brake rotors is a pretty straight-forward process. Read on to see the tools, time, and steps needed when replacing brake rotors.

We often hear people say that brake pads should be replaced when they wear down to 3mm, while others say it's 5mm, and some ...

Ford is recalling over 270,000 Ford Expedition and Lincoln Navigator full-sized SUVs from the 2022 through 2024 model years because their front brake lines may leak and cause the front brakes to ...

Unfortunately, there is no clear-cut schedule that tells you when it’s time to replace the brakes, so you need to rely on your ears and the advice of an experienced automotive technician.

I recently had an oil change done and they said the pads on the front and rear brakes were down to 3 mm. Should I have both sets replaced right away?